…or, looking for tips on stuff that are useful to have that most people don’t think about.

  • Sanctus@anarchist.nexus
    link
    fedilink
    English
    arrow-up
    9
    ·
    7 hours ago

    Don’t listen to [email protected] your privacy is being illegally invaded and your every move tracked. Sanwu Lasers dot net. Get a 3w one with the focusing lens at the least. But you’ll need safety goggles to operate a 3w focused beam and anything higher. DO NOT shine these where they could intercept with a person.

    • JoshuaFalken@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      7 hours ago

      Would I be right in thinking that viewing the beam alone isn’t damaging, but looking at the lens is? Presumably then, unintended viewing could be limited if not eliminated by shining it through a tube?

      • Sanctus@anarchist.nexus
        link
        fedilink
        English
        arrow-up
        8
        ·
        6 hours ago

        No one should be viewing any of it without goggles. It will damage your vision after just a few seconds of indirect exposure, direct exposure (pointing it at your eyes) will blind you.

        • JoshuaFalken@lemmy.world
          link
          fedilink
          arrow-up
          6
          ·
          6 hours ago

          Glad to know I was quite wrong. Thank you for potentially saving my vision.

          Not knowing much about lasers myself obviously, is a welding helmet be sufficient protection from indirect exposure?

          • Sanctus@anarchist.nexus
            link
            fedilink
            English
            arrow-up
            4
            ·
            6 hours ago

            Yes, with my 3w, I can use it periodically without goggles but I cannot look at the beam for more than a few seconds. A welding helmet will protect you completely. It does make it hard to use with precision at night tho.