I’ve been getting repeated emails from my ISP about “exceeding my bandwidth cap” and they feel very incorrect.

My current router is a Cisco RV260, and it doesn’t have a great way of tracking traffic. (There’s a port traffic screen that does give tx/rx bytes, but no way to see any date ranges).

Is there anything out there that can give an accurate account of Internet traffic? It would be nice if I could see destination domain/IPs, just for kicks and giggles, but an overall traffic count is all I really need.

Thanks!

  • towerful@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I used to use pfSense. It’s great.
    I recently moved to opnSense… And I think it’s better.
    Both are good, both are BSD, both have similar settings (tutorials are mostly interchangeable)… But opnSense just does it better, updates more frequently, nicer UI etc.

    If you are talking to yours ISP, it’s worth getting a bridge modem, and settings details for your own router.
    This modem will turn “isp” into ethernet, then your opnSense/pfSense can make the actual connection. This means it gets the public IP directly.

    • Naate@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      I’m already using my own modem, none of that locked-down rental nonsense from my isp.

      What hardware do you use for pf/opnSense? All of the recommended stuff I’ve seen is almost prohibitively expensive for my home networking budget.

      • towerful@beehaw.org
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        My home network has one of those fanless 4 port doodaas from Amazon/eBay if you search for pfSense.
        Never had an issue with it, I’m on 300/100mbit broadband tho.

        For another project for 10gbps networking, I used a refubed single-socketed dell r630. Probably massively overkill. Also, never saw traffic anywhere near 10gbps… So can’t really comment on that.

        • Naate@beehaw.orgOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          edit-2
          1 year ago

          Yeah, those little micro units are what I had seen recommended. $300-400 is definitely pushing it for me. Especially when I would also want a bigger switch to accompany it.

          Guess I need to stop eating avocado toast.

          Edit: how is the stability/uptime for those little machines? Historically, I’ve always had problems with my routers needing to be rebooted at least once a month after they’ve been in service for 18-24 months. Even my current “business class” cisco router is crapping out on me every month.

          • towerful@beehaw.org
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            My home box ran for a few years with no issues, until I started having DNS issues. I’m fairly certain that was unbound and the blocklists I had selected, tho.
            I set up a Cron job to update the block lists every night, and give unbound service a restart.
            It’s been solid since then, and my DNS issues have disappeared.

            Now, I am checking for updates and installing those every few months. So it gets a restart when that happens.

            You could get a refurbished SFF computer that has a low profile PCIe slot, and put an Intel 4 port network card in it.
            Would probably cost $150 tops. And its a solid entry! Certainly, that’s what I used before I bought one of the fanless network appliance type things.

            • Naate@beehaw.orgOP
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I have my old Athlon fx lying around. Needs a case, psu, and the nic… Hmmmm

              • towerful@beehaw.org
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                Might be a little old? Not sure, you would have to research it.
                I’m not well versed in what pfSense/opnSense needs, which is why I threw r630s at a project that mattered.
                Some cheapo refubed i3 with an Intel NIC card would do. I just suggested the SFF refurb because a lot of people like low power (and SFFs are generally low power)