There’s a painting of Hobbiton that has been sat in my living room for two years because I dare not hang it up for fear of doing it wrong. Last time I tried to hang anything up (a clock in that case) the plaster just came off the wall around it and I had to pay to get it fixed. That was with just a hammer and a hook! I’m not getting a drill!
Drywall anchors are required for hanging heavier objects on drywall. You drill a hole and hammer them in to attach screws into, and they distribute the force over a larger area so they don’t just pull out the drywall. You also need to consider the weight limits of drywall anchors. If you need to install something heavy on drywall you need to drill into the studs, the wooden support structure between the drywall. It’s not hard, and a lot of drywall anchors have a little visual guide on how to use them.
If it’s a plaster wall / dry wall don’t use the masonry anchors mentioned by the other person lol.
Just go to a hardware store and ask for a ‘hollow wall anchor’. My favourite type is wall mates. Watch a youtube video on how to put them up with any cheap screwdriver!
Oh, in that case you need a rotary hammer with a masonry bit to put a hole in the brick or concrete, plus dedicated concrete screws to fasten. If the object you’re hanging is light enough, you may be able to use adhesive instead.
If you have a good stone wall you can simply hammer a nail into your wall and use that for hanging up sour painting. If you want/need a hook installed its still quite simple. First, get a hook, then you need to get these grey things in an appropriate size (I dont know the English word for them):
The screw of the hook should be a bit bigger than the entrance hole. Then drill a hole into the wall (the grey things should fit perfectly into the hole), stick the grey thing into it and screw the hook into the grey thing. Screwing it into this grey thing expands it guaranteeing a proper grip to the wall.
Generally called rawlplugs in the UK. Invented by John Rawlings who named his company Rawlplug. One of those tiny little inventions which is everywhere.
I am not paid in anyway (I wish) but there’s a brand called Command that makes hooks with adhesives for hanging things up. They have ones specifically for paintings that distribute a lot of wait across multiple hanging points. That might be worth checking out! The adhesive also comes off of the wall without any damage. You pull down on the strip and it dislodges the glue via stretching or whatever so it pulls it off without messing with the wall. At least from personal experience with the ones I’ve used and I’ve used the painting ones to hang an 8lb piece of shit.
Yes, but follow the instructions - mainly clean the wall before sticking it on - use isopropyl alcohol - and stuck it to the wall and wait for a while before you load it up.
My mom has lost a number of breakable items due to hanging them with those and they later peel off the wall. Can’t speak to if she was skipping steps or whatever when she hung them but just FYI. Maybe don’t use them for stuff that will break and can’t be replaced. They held up for a long time but still failed eventually.
The place I’m renting has been painted over so many times that it’s highly likely a few layers will come off if you hang anything heavy, regardless of the rating of the adhesive.
There’s a painting of Hobbiton that has been sat in my living room for two years because I dare not hang it up for fear of doing it wrong. Last time I tried to hang anything up (a clock in that case) the plaster just came off the wall around it and I had to pay to get it fixed. That was with just a hammer and a hook! I’m not getting a drill!
Drywall anchors are required for hanging heavier objects on drywall. You drill a hole and hammer them in to attach screws into, and they distribute the force over a larger area so they don’t just pull out the drywall. You also need to consider the weight limits of drywall anchors. If you need to install something heavy on drywall you need to drill into the studs, the wooden support structure between the drywall. It’s not hard, and a lot of drywall anchors have a little visual guide on how to use them.
If it’s a plaster wall / dry wall don’t use the masonry anchors mentioned by the other person lol.
Just go to a hardware store and ask for a ‘hollow wall anchor’. My favourite type is wall mates. Watch a youtube video on how to put them up with any cheap screwdriver!
(If it matters I use this stuff daily in my job)
It’s not drywall, it’s either brick or concrete covered by plaster.
Oh, in that case you need a rotary hammer with a masonry bit to put a hole in the brick or concrete, plus dedicated concrete screws to fasten. If the object you’re hanging is light enough, you may be able to use adhesive instead.
If you have a good stone wall you can simply hammer a nail into your wall and use that for hanging up sour painting. If you want/need a hook installed its still quite simple. First, get a hook, then you need to get these grey things in an appropriate size (I dont know the English word for them):
The screw of the hook should be a bit bigger than the entrance hole. Then drill a hole into the wall (the grey things should fit perfectly into the hole), stick the grey thing into it and screw the hook into the grey thing. Screwing it into this grey thing expands it guaranteeing a proper grip to the wall.
wall plug, dowel, screw anchor, doobel
Generally called rawlplugs in the UK. Invented by John Rawlings who named his company Rawlplug. One of those tiny little inventions which is everywhere.
TIL!
Me too, to be honest. I knew they were called rawlplugs but didn’t know why!
I am not paid in anyway (I wish) but there’s a brand called Command that makes hooks with adhesives for hanging things up. They have ones specifically for paintings that distribute a lot of wait across multiple hanging points. That might be worth checking out! The adhesive also comes off of the wall without any damage. You pull down on the strip and it dislodges the glue via stretching or whatever so it pulls it off without messing with the wall. At least from personal experience with the ones I’ve used and I’ve used the painting ones to hang an 8lb piece of shit.
Yes, but follow the instructions - mainly clean the wall before sticking it on - use isopropyl alcohol - and stuck it to the wall and wait for a while before you load it up.
My mom has lost a number of breakable items due to hanging them with those and they later peel off the wall. Can’t speak to if she was skipping steps or whatever when she hung them but just FYI. Maybe don’t use them for stuff that will break and can’t be replaced. They held up for a long time but still failed eventually.
Those things are fantastic. Just make sure you get ones rated for the proper weight.
Agreed. They have different strengths as well. Just make sure you get one that can hold the weight and won’t come off and take paint with it.
The place I’m renting has been painted over so many times that it’s highly likely a few layers will come off if you hang anything heavy, regardless of the rating of the adhesive.
Why would you hang shit and where the hell did you get an 8 lbs piece of it?
I hate the wait when hanging watches too.
Those are a godsend. I have something similar at home, although it’s a different brand. I think it’s called “Tesa” or something like that.
I can second those work really well despite my dismissing them for years. Just make sure to get the right type for the job.
On the positive side, you now know what a hammer does.
If you still want to hang your painting, you should learn what a drill does. Start with a small drill.
most picture hooks would be tacked in with a hammer
Unless it’s a large or heavy frame or canvas, in which case you’ll want at least two hooks to distribute weight more evenly.
deleted by creator