Here’s an update. I set up atop on my VPS and waited until the issue occurred again. Here’s the atop log from the event.

ATOP - ip-172-31-7-27   2023/07/22  18:40:02   -----------------   10m0s elapsed
PRC | sys    9m49s | user  12.66s | #proc    134 | #zombie    0 | #exit      3 |
CPU | sys      99% | user      0% | irq       0% | idle      0% | wait      0% |
MEM | tot   957.1M | free   49.8M | buff    0.1M | slab   95.1M | numnode    1 |
SWP | tot     0.0M | free    0.0M | swcac   0.0M | vmcom   2.4G | vmlim 478.6M |
PAG | numamig    0 | migrate    0 | swin       0 | swout      0 | oomkill    0 |
PSI | cpusome  63% | memsome  99% | memfull  88% | iosome   99% | iofull    0% |
DSK |         xvda | busy    100% | read  461505 | write    171 | avio 1.30 ms |
DSK |        xvda1 | busy    100% | read  461505 | write    171 | avio 1.30 ms |
NET | transport    | tcpi    2004 | tcpo    1477 | udpi       9 | udpo      11 |
NET | network      | ipi     2035 | ipo     1521 | ipfrw     20 | deliv   2015 |
NET | eth0    ---- | pcki    2028 | pcko    1500 | si    4 Kbps | so    1 Kbps |

    PID SYSCPU USRCPU  VGROW  RGROW  RDDSK  WRDSK  CPU CMD            
     41  5m17s  0.00s     0B     0B     0B     0B  53% kswapd0        
      1 21.87s  0.00s     0B -80.0K   1.2G     0B   4% systemd        
  21681 20.28s  0.00s     0B   4.0K   4.2G     0B   3% lemmy          
    435 18.00s  0.00s     0B 392.0K 163.1M     0B   3% snapd          
  21576 17.20s  0.00s     0B     0B   4.2G     0B   3% pict-rs        

The culprit seems to be kswapd0 trying to move memory to swap space, although there is no swap space.

I set memory swappiness to 0 on the system for now, I’ll check if that makes a difference.

I had the same thing happen. Max CPU usage, couldn’t even ssh in to fix it and had to reboot from aws console. Logs don’t show anything unusual apart from postgres restarting 30 minutes into the spike, possibly from being killed by the system.

You say yours solved itself in 10 minutes, mine didn’t seem to stop after 2 hours, so I reeboted. It could be that my vps is just 1 CPU, 1 GB RAM, so it took longer doing whatever it was doing.

Now I set up RAM and CPU limits following this question, and an alert so I can hopefully ssh in and figure out what’s happening when it’s happening.

Any suggestions on what I should be looking at if I manage to get into the system?

I figured it out after a good night’s sleep.

The UI doesn’t let you send a request with empty allowed instances, it either sends an array with your picks or no array at all if you selected none. To reset allowed instances you need to send an empty array to the API.

The easiest way to do it is

• Open browser devtools network tab or equivalent
• Send a request with at least one allowed instance
• Edit the request JSON body to empty the array
• Resend the request

I think Chrome lets you copy the request with authentication to send with something like curl, I used Firefox which lets you edit and resend directly.

Peace ✌