Also second hand lab equipment. I was tired of my kitchen scale breaking and having annoying features like auto off after like 60 seconds. Got an ohaus lab scale off eBay for like $50, handles 18lbs, has a configuration menu with tons of options and features like count mode, sequential weight summing, and lets you set auto off for up to 30 minutes or completely disable auto off. Takes regular AAs or plugs into an outlet. I love it and it’s built like a tank.
Man, having worked in a couple research labs in a previous life, there’s no way I’d use a used lab scale for food. Especially when $50 will actually get you a pretty decent scale that has not been potentially used for weighing everything from diseased mice to stool samples to unidentified precipitates from a failed chemical reaction.
Since you’re here to type this, it was probably not used for anything too nasty, but I do not endorse that as a way to save a few bucks!
Idk worrying about a lab leak type pathogen scenario through an ebay sale seems far fetched to me. I picked one that looked lightly used and clean and wiped it down with disinfectant when I got it. The chance of a pathogen surviving that long doesn’t sound like a realistic concern. Most things it plausibly would have been exposed to, save for like highly radioactive dust getting lodged in its crevices, is easily handled with basic sanitation and hand washing. And it’s not like I’m putting food on the surface anyways.
In general anything made for businesses. They might be fine with us having stuff that doesn’t work, but businesses still need things that work to produce things that don’t.
The first one was 2 weeks outside of warranty, the second one we’re currently waiting on the manufacturer and their mechanic. It’s a whole thing but it’s looking like it might be a refund at this point since it’s taking so long for them to even come look at it.
The first one wasn’t repaired because the part was back-ordered and by the time we repaired it it wouldve ended up costing the same as a new one.
$1700 for a seven-year warranty. How much you want to bet it’s specifically engineered to last no more than eight years?
The water heater that came with my house I bought in '98 lasted 20 years. I replaced it with the best I could afford at the time, which had a seven-year warranty. It lasted just over seven years. I replaced that one a couple of months ago with the longest warranty one I could find, which is twelve years. I know I’ll be replacing it in twelve years.
One thing to note is that planned obsolescence for machines is not something that is easy to do to the level that you’re describing it.
Even if they use substandard materials at specific junctures with an estimated wearout time limit, there’s always the chance that a manufacturing flaw can increase the time between breakdowns
I think a good follow-up plan would be something more like finding the parts that break down and then digitizing them and then contracting with a service like JLCPCB to manufacture those individual parts on demand.
You could probably start a fairly successful company on just that if you had the time and energy to get the whole process rolling.
A combination of a SLS 3D printer to make the parts out of metal, or, you know, really high-quality 3D printer to make them out of nylon or whatever plastic is necessary, and getting the appropriate springs and levers and bearings and everything to fill in the gaps, you probably could make a nice side business for yourself just custom making the parts that break down the most often for appliances.
My cousin had a coin operated speed queen washer when I briefly lived with her. The laundromat was getting rid of it not due to functioning, but because it would cost too much to retrofit it to use credit or bills, when it was already quite old.
You could use coins to make it work, but the panel was missing and you’d just stick your hand in and flip the switch. Always felt like you’d electrocute yourself.
Sucker ran great and she was doing 2 loads a day minimum (clearly no understanding of birth control, but she got her tubes tied after the 6th kid came out, so…)
She got it for far less than the price of a new bare-bones machine, so that could be a great option for anyone who may want one!
Got links?
Anything made for commercial kitchens.
Also second hand lab equipment. I was tired of my kitchen scale breaking and having annoying features like auto off after like 60 seconds. Got an ohaus lab scale off eBay for like $50, handles 18lbs, has a configuration menu with tons of options and features like count mode, sequential weight summing, and lets you set auto off for up to 30 minutes or completely disable auto off. Takes regular AAs or plugs into an outlet. I love it and it’s built like a tank.
Man, having worked in a couple research labs in a previous life, there’s no way I’d use a used lab scale for food. Especially when $50 will actually get you a pretty decent scale that has not been potentially used for weighing everything from diseased mice to stool samples to unidentified precipitates from a failed chemical reaction.
Since you’re here to type this, it was probably not used for anything too nasty, but I do not endorse that as a way to save a few bucks!
Idk worrying about a lab leak type pathogen scenario through an ebay sale seems far fetched to me. I picked one that looked lightly used and clean and wiped it down with disinfectant when I got it. The chance of a pathogen surviving that long doesn’t sound like a realistic concern. Most things it plausibly would have been exposed to, save for like highly radioactive dust getting lodged in its crevices, is easily handled with basic sanitation and hand washing. And it’s not like I’m putting food on the surface anyways.
Only thing I would be scared of is ethidium bromide on your food, but that probably wouldn’t be measured on a kg scale.
Yeah I think if I was gonna start using used lab equipment, a new autoclave would be my first purchase.
Salmonella recall? Nah, I’ve got a kitchen autoclave, I’ll be fine
In general anything made for businesses. They might be fine with us having stuff that doesn’t work, but businesses still need things that work to produce things that don’t.
Speed queen is one for washers and dryers
Anything that’s sold in Canada? I’m in the market for a new washer after my last two died on the 2 year mark.
No warranty? If you bought with a credit card they usually have a warranty extension feature and will extend the manufacturer’s warranty for you.
The first one was 2 weeks outside of warranty, the second one we’re currently waiting on the manufacturer and their mechanic. It’s a whole thing but it’s looking like it might be a refund at this point since it’s taking so long for them to even come look at it.
The first one wasn’t repaired because the part was back-ordered and by the time we repaired it it wouldve ended up costing the same as a new one.
$1700 for a seven-year warranty. How much you want to bet it’s specifically engineered to last no more than eight years?
The water heater that came with my house I bought in '98 lasted 20 years. I replaced it with the best I could afford at the time, which had a seven-year warranty. It lasted just over seven years. I replaced that one a couple of months ago with the longest warranty one I could find, which is twelve years. I know I’ll be replacing it in twelve years.
And by the time you got rid of it it was criminally inefficient.
One thing to note is that planned obsolescence for machines is not something that is easy to do to the level that you’re describing it.
Even if they use substandard materials at specific junctures with an estimated wearout time limit, there’s always the chance that a manufacturing flaw can increase the time between breakdowns
I think a good follow-up plan would be something more like finding the parts that break down and then digitizing them and then contracting with a service like JLCPCB to manufacture those individual parts on demand.
You could probably start a fairly successful company on just that if you had the time and energy to get the whole process rolling.
A combination of a SLS 3D printer to make the parts out of metal, or, you know, really high-quality 3D printer to make them out of nylon or whatever plastic is necessary, and getting the appropriate springs and levers and bearings and everything to fill in the gaps, you probably could make a nice side business for yourself just custom making the parts that break down the most often for appliances.
Speed queen washing machine
If it’ll run in a Laundromat for 30 years… it’ll run in your home.
My cousin had a coin operated speed queen washer when I briefly lived with her. The laundromat was getting rid of it not due to functioning, but because it would cost too much to retrofit it to use credit or bills, when it was already quite old.
You could use coins to make it work, but the panel was missing and you’d just stick your hand in and flip the switch. Always felt like you’d electrocute yourself.
Sucker ran great and she was doing 2 loads a day minimum (clearly no understanding of birth control, but she got her tubes tied after the 6th kid came out, so…)
She got it for far less than the price of a new bare-bones machine, so that could be a great option for anyone who may want one!
Speed Queen for washer / dryer.
https://speedqueen.com/products/all-products/
Vzug. Sadly only 2 year warranty